FairTrak, FairPick Flex and QuickPick have a time violation feature designed to minimize cheating. You can define a violation time (in seconds) on the Portal per Piece Type Task. Employees will be able to scan their badges out in the field, but data synced to the Portal will be flagged if registered between the time violation.

If you utilize more than one FairTrak or QuickPick unit in the field, this feature can help flag workers who log pieces on one machine, and log the same pieces on another machine.

Please read the following instructions and notes to correctly implement and understand the time violation feature.

Sync the handheld computer times. (Handheld computer

  1. Go to Settings --> Data & Time
  2. Turn on Automatic date & time
  3. Select Use GPS-provided time
  4. Wait a few minutes
  5. Turn off Automatic date & time

Set the violation time (Portal)

  1. Select Manage --> Tasks
  2. Select the appropriate Task
  3. Enter the Time Violation in seconds
  4. Press save

Filter time violations (Portal)

  1. Select Log --> Task
  2. Show --> Rejected Entries (check box)

IMPORTANT NOTES

  • The calculations are done on the Customer Portal.
  • Apps are unaware of the time violations.
  • The first log is accepted. Subsequent logs, within the violation time, are marked and not included in reports.
  • Time violation logs must be restored (in Edit Mode) to be included in reports.

If you have any questions or need assistance, please contact 2nd Sight at 509-381-2112 or info@2ndsightbio.com