Cipherlab RS36 Setup

While unpacking the box, examine the contents. If anything is missing or damaged, contact your 2^nd Sight sales representative at 509-381-2112 or at This email address is being protected from spambots. You need JavaScript enabled to view it..

Battery Installation

1. Insert a fully-charged main battery into the grooves from the battery top, and then press down the lower edge of the battery.
2. Press both left and right side edges of the battery to make sure that it is firmly installed without any interstice.
3. Slide the battery latch leftward to “Lock” position.

Install SD Card

1. Remove the battery cover and battery.
2. Insert the card into MicroSD slot, according to the directions indicated.
3. Push the cards to lock.
4. Replace the battery cover and push the battery lock back to the lock position.

Power On the RHC

1. Press the power button to power on the RHC.

Initial Setup

1. Press “Arrow” or “Start” on welcome screen.
2. Press “NEXT” on Deploy with barcode screen.
3. Press “Skip” on Connect to mobile network screen.
4. Select a Wi-Fi newtwork and enter password.
5. Press “Don’t copy” on Copy apps & data.
6. Create a Google account.
7. Select “Skip” on Add phone number screen.
8. Select “Next” on Review your account info screen.
9. Select “I agree” on Privacy and Terms screen
10. Press “Confirm” on Confirm personalization screen.
11. Press “Accept” on Google services screen.
12. Press “Skip” on Set a PIN screen.
13. Press “Skip anyway” on Skip screen lock popup.
14. Press “Skip” on Access you Assistant with Hey Google screen.
15. Press “Skip” on Access you Assistant without unlocking your device screen.
16. Press “Skip” on Pay faster with Google Pay screen.
17. Press “No thanks” on Anything else screen.

Set the Wallpaper

1. Press and hold screen.
2. Select “Wallpapers”.
3. Select “Complete this action using Photos”.
4. Press “Just once”
5. Select the background picture and set as wallpaper.

Disable Rotate

1. Open Setting (Swipe up for app drawer or swipe down from top of screen.)
2. Scroll down and press “Display”.
3. Set Auto-rotate screen off.

Set Screen Timeout

1. Open Setting (Swipe up for app drawer or swipe down from top of screen.)
2. Scroll down and press “Display”.
3. Set Screen time out to 30 minutes

Setup Barcode Reader

1. Open ReaderConfig (Swipe up for app drawer)
2. Select the “Data Output” button.
3. Set the following:

• • Keyboard Emulation: KeyEvent
  • Auto Enter: Disable
  • Auto Enter Character: None
  • Display Code Type: Unchecked
  • Display Code Length: Unchecked
  • Prefix: blank/nothing
  • Suffix: ,
  • Field Delimiter: None
  • Barcode Charset: UTF-8
  • Clear Previous Data: Checked

4. Press back and exit to top menu to save settings.

Install App

1. Open Google Play Store (Swipe up for app drawer)
2. Search for app name.
3. Install app
4. Enter account ID and Secret.