When each employee has a unique (not standardized) container used for weighing in the field, and you do not have an RFID code attached to the container, you will want to link the tare weight of the employee's container to the employee's RFID card so that the weigh process is fair to both you and your employee.

Here is the process:

Clock In
  • Clock in at the assigned Weighing Station by pressing the “In” button.
  • Touch the Employee Badge to the red light on the RFID Reader. The Weighing Station beeps when it registers the Badge.
Determining Unique Container’s Tare Weight
  • Next, the Weighing Station instructs, “Weigh Empty Container.” Place the employee’s EMPTY container on the scale platform of the assigned Weighing Station to register the weight of his/her empty container (tare weight).
  • When the Weighing Station beeps, the tare is registered to that Employee Badge, and the employee takes the container off the scale platform.

NOTE: If the employee uses multiple Weighing Stations throughout the day, he/she must repeat the clock-in process (Steps 1-4 of this section) on each machine. The employee must reset his/her tare weights every day.

  • Begin harvesting.

If you have any issues regarding the tare weight of an employee's unique container, please contact 2nd Sight at 509-381-2112 or This email address is being protected from spambots. You need JavaScript enabled to view it..

If you have any questions or need assistance, please contact 2nd Sight at 509-381-2112 or info@2ndsightbio.com